[PATCH v2 4/4] i2c: thunderx: Adding ioclk support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adding support to use ioclk as reference clock if sclk not
present to make it SOC agnostic.
In case, it's not defined in dts/acpi table, use 800MHz as
default clock.

Signed-off-by: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-thunderx-pcidrv.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
index 3dd5a4d798f99e9b5282360cf9d5840042fc8dcc..0f2a4a677762e832c10046a5702b21f6d13ba7c7 100644
--- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -27,7 +27,7 @@
 
 #define PCI_DEVICE_ID_THUNDER_TWSI	0xa012
 
-#define SYS_FREQ_DEFAULT		700000000
+#define SYS_FREQ_DEFAULT		800000000
 
 #define TWSI_INT_ENA_W1C		0x1028
 #define TWSI_INT_ENA_W1S		0x1030
@@ -99,7 +99,8 @@ static void thunder_i2c_clock_enable(struct device *dev, struct octeon_i2c *i2c)
 		i2c->sys_freq = clk_get_rate(i2c->clk);
 	} else {
 		/* ACPI */
-		device_property_read_u32(dev, "sclk", &i2c->sys_freq);
+		if (device_property_read_u32(dev, "sclk", &i2c->sys_freq))
+			device_property_read_u32(dev, "ioclk", &i2c->sys_freq);
 	}
 
 skip:
@@ -181,7 +182,6 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
 	if (!i2c->twsi_base)
 		return -EINVAL;
 
-	thunder_i2c_clock_enable(dev, i2c);
 	ret = device_property_read_u32(dev, "clock-frequency", &i2c->twsi_freq);
 	if (ret)
 		i2c->twsi_freq = I2C_MAX_STANDARD_MODE_FREQ;
@@ -195,12 +195,12 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
 
 	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX);
 	if (ret < 0)
-		goto error;
+		return ret;
 
 	ret = devm_request_irq(dev, pci_irq_vector(pdev, 0), octeon_i2c_isr, 0,
 			       DRV_NAME, i2c);
 	if (ret)
-		goto error;
+		return ret;
 
 	ret = octeon_i2c_init_lowlevel(i2c);
 	if (ret)
@@ -212,6 +212,9 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
 	 */
 	if (octeon_i2c_is_otx2(pdev) && IS_LS_FREQ(i2c->twsi_freq))
 		i2c->sys_freq = 100000000;
+	else
+		thunder_i2c_clock_enable(dev, i2c);
+
 	octeon_i2c_set_clock(i2c);
 
 	i2c->adap = thunderx_i2c_ops;
@@ -238,7 +241,8 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
 	return 0;
 
 error:
-	thunder_i2c_clock_disable(dev, i2c->clk);
+	if (!IS_LS_FREQ(i2c->twsi_freq))
+		thunder_i2c_clock_disable(dev, i2c->clk);
 	return ret;
 }
 
-- 
2.17.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux