[PATCH net-next v7 7/9] net: pcs: Add 10GBASE-R mode for Synopsys Designware XPCS

[Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>]

Add basic support for XPCS using 10GBASE-R interface. This mode will
be extended to use interrupt, so set pcs.poll false. And avoid soft
reset so that the device using this mode is in the default configuration.

Signed-off-by: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
---
 drivers/net/pcs/pcs-xpcs.c   | 30 ++++++++++++++++++++++++++++++
 include/linux/pcs/pcs-xpcs.h |  1 +
 2 files changed, 31 insertions(+)

diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 539cd43eae8d..c7c8b8d1311f 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -64,6 +64,16 @@ static const int xpcs_xlgmii_features[] = {
 	__ETHTOOL_LINK_MODE_MASK_NBITS,
 };
 
+static const int xpcs_10gbaser_features[] = {
+	ETHTOOL_LINK_MODE_Pause_BIT,
+	ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+	ETHTOOL_LINK_MODE_10000baseSR_Full_BIT,
+	ETHTOOL_LINK_MODE_10000baseLR_Full_BIT,
+	ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
+	ETHTOOL_LINK_MODE_10000baseER_Full_BIT,
+	__ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
 static const int xpcs_sgmii_features[] = {
 	ETHTOOL_LINK_MODE_Pause_BIT,
 	ETHTOOL_LINK_MODE_Asym_Pause_BIT,
@@ -106,6 +116,10 @@ static const phy_interface_t xpcs_xlgmii_interfaces[] = {
 	PHY_INTERFACE_MODE_XLGMII,
 };
 
+static const phy_interface_t xpcs_10gbaser_interfaces[] = {
+	PHY_INTERFACE_MODE_10GBASER,
+};
+
 static const phy_interface_t xpcs_sgmii_interfaces[] = {
 	PHY_INTERFACE_MODE_SGMII,
 };
@@ -123,6 +137,7 @@ enum {
 	DW_XPCS_USXGMII,
 	DW_XPCS_10GKR,
 	DW_XPCS_XLGMII,
+	DW_XPCS_10GBASER,
 	DW_XPCS_SGMII,
 	DW_XPCS_1000BASEX,
 	DW_XPCS_2500BASEX,
@@ -246,6 +261,7 @@ static int xpcs_soft_reset(struct dw_xpcs *xpcs,
 
 	switch (compat->an_mode) {
 	case DW_AN_C73:
+	case DW_10GBASER:
 		dev = MDIO_MMD_PCS;
 		break;
 	case DW_AN_C37_SGMII:
@@ -872,6 +888,8 @@ int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
 		return -ENODEV;
 
 	switch (compat->an_mode) {
+	case DW_10GBASER:
+		break;
 	case DW_AN_C73:
 		if (phylink_autoneg_inband(mode)) {
 			ret = xpcs_config_aneg_c73(xpcs, compat);
@@ -1033,6 +1051,9 @@ static void xpcs_get_state(struct phylink_pcs *pcs,
 		return;
 
 	switch (compat->an_mode) {
+	case DW_10GBASER:
+		phylink_mii_c45_pcs_get_state(xpcs->mdiodev, state);
+		break;
 	case DW_AN_C73:
 		ret = xpcs_get_state_c73(xpcs, state, compat);
 		if (ret) {
@@ -1188,6 +1209,12 @@ static const struct xpcs_compat synopsys_xpcs_compat[DW_XPCS_INTERFACE_MAX] = {
 		.num_interfaces = ARRAY_SIZE(xpcs_xlgmii_interfaces),
 		.an_mode = DW_AN_C73,
 	},
+	[DW_XPCS_10GBASER] = {
+		.supported = xpcs_10gbaser_features,
+		.interface = xpcs_10gbaser_interfaces,
+		.num_interfaces = ARRAY_SIZE(xpcs_10gbaser_interfaces),
+		.an_mode = DW_10GBASER,
+	},
 	[DW_XPCS_SGMII] = {
 		.supported = xpcs_sgmii_features,
 		.interface = xpcs_sgmii_interfaces,
@@ -1290,6 +1317,9 @@ struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev,
 		}
 
 		xpcs->pcs.ops = &xpcs_phylink_ops;
+		if (compat->an_mode == DW_10GBASER)
+			return xpcs;
+
 		xpcs->pcs.poll = true;
 
 		ret = xpcs_soft_reset(xpcs, compat);
diff --git a/include/linux/pcs/pcs-xpcs.h b/include/linux/pcs/pcs-xpcs.h
index d2da1e0b4a92..61df0c717a0e 100644
--- a/include/linux/pcs/pcs-xpcs.h
+++ b/include/linux/pcs/pcs-xpcs.h
@@ -18,6 +18,7 @@
 #define DW_AN_C37_SGMII			2
 #define DW_2500BASEX			3
 #define DW_AN_C37_1000BASEX		4
+#define DW_10GBASER			5
 
 struct xpcs_id;
 
-- 
2.27.0