On Mon, Apr 24, 2023 at 08:28:08AM -0500, Rob Herring wrote: > > On Sun, 23 Apr 2023 14:40:18 +0200, Stanislav Jakubek wrote: > > Convert Broadcom Kona family I2C bindings to DT schema. > > > > Changes during conversion: > > - add used, but previously undocumented SoC-specific compatibles > > - drop references to SoCs that are not upstream > > - add supported clock frequencies according to the Linux driver [1] > > > > [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/i2c/busses/i2c-bcm-kona.c#n731 > > > > Signed-off-by: Stanislav Jakubek <stano.jakubek@xxxxxxxxx> > > --- > > Changes in v2: > > - add missing arm-gic.h include > > - fix indentation to 4 spaces > > > > .../devicetree/bindings/i2c/brcm,kona-i2c.txt | 35 ----------- > > .../bindings/i2c/brcm,kona-i2c.yaml | 59 +++++++++++++++++++ > > 2 files changed, 59 insertions(+), 35 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt > > create mode 100644 Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml > > > > Running 'make dtbs_check' with the schema in this patch gives the > following warnings. Consider if they are expected or the schema is > incorrect. These may not be new warnings. > > Note that it is not yet a requirement to have 0 warnings for dtbs_check. > This will change in the future. > > Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/72ba28004afb733224f7294a146fc2a6a5a834a7.1682252615.git.stano.jakubek@xxxxxxxxx > > > i2c@16000: compatible:0: 'brcm,kona-i2c' is not one of ['brcm,bcm11351-i2c', 'brcm,bcm21664-i2c', 'brcm,bcm23550-i2c'] > arch/arm/boot/dts/bcm23550-sparrow.dtb > > i2c@16000: compatible: ['brcm,kona-i2c'] is too short > arch/arm/boot/dts/bcm23550-sparrow.dtb > > i2c@17000: compatible:0: 'brcm,kona-i2c' is not one of ['brcm,bcm11351-i2c', 'brcm,bcm21664-i2c', 'brcm,bcm23550-i2c'] > arch/arm/boot/dts/bcm23550-sparrow.dtb > > i2c@17000: compatible: ['brcm,kona-i2c'] is too short > arch/arm/boot/dts/bcm23550-sparrow.dtb > > i2c@18000: compatible:0: 'brcm,kona-i2c' is not one of ['brcm,bcm11351-i2c', 'brcm,bcm21664-i2c', 'brcm,bcm23550-i2c'] > arch/arm/boot/dts/bcm23550-sparrow.dtb > > i2c@18000: compatible: ['brcm,kona-i2c'] is too short > arch/arm/boot/dts/bcm23550-sparrow.dtb > > i2c@1c000: compatible:0: 'brcm,kona-i2c' is not one of ['brcm,bcm11351-i2c', 'brcm,bcm21664-i2c', 'brcm,bcm23550-i2c'] > arch/arm/boot/dts/bcm23550-sparrow.dtb > > i2c@1c000: compatible: ['brcm,kona-i2c'] is too short > arch/arm/boot/dts/bcm23550-sparrow.dtb > These warnings are fixed by the first patch in the series. Maybe it didn't apply? Regards, Stanislav
