On Mon, 24 Apr 2023 18:13:49 +0800, Delphine CC Chiu wrote: > Add a device tree bindings for ltc4286 driver. > > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx> > --- > .../bindings/hwmon/lltc,ltc4286.yaml | 47 +++++++++++++++++++ > MAINTAINERS | 9 ++++ > 2 files changed, 56 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/hwmon/lltc,ltc4286.example.dts:22.17-30: Warning (reg_format): /example-0/i2c/ltc4286@40:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/hwmon/lltc,ltc4286.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/lltc,ltc4286.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/lltc,ltc4286.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/lltc,ltc4286.example.dts:18.13-26.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #address-cells for I2C bus Documentation/devicetree/bindings/hwmon/lltc,ltc4286.example.dts:18.13-26.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #size-cells for I2C bus Documentation/devicetree/bindings/hwmon/lltc,ltc4286.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/lltc,ltc4286.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge' Documentation/devicetree/bindings/hwmon/lltc,ltc4286.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/lltc,ltc4286.example.dts:20.24-25.15: Warning (avoid_default_addr_size): /example-0/i2c/ltc4286@40: Relying on default #address-cells value Documentation/devicetree/bindings/hwmon/lltc,ltc4286.example.dts:20.24-25.15: Warning (avoid_default_addr_size): /example-0/i2c/ltc4286@40: Relying on default #size-cells value Documentation/devicetree/bindings/hwmon/lltc,ltc4286.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230424101352.28117-2-Delphine_CC_Chiu@xxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
