Re: [PATCH v2] i2c: ocores: generate stop condition after timeout in polling mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 13, 2023 at 11:37:37AM +0200, Matthias Schiffer wrote:
> From: Gregor Herburger <gregor.herburger@xxxxxxxxxxxx>
> 
> In polling mode, no stop condition is generated after a timeout. This
> causes SCL to remain low and thereby block the bus. If this happens
> during a transfer it can cause slaves to misinterpret the subsequent
> transfer and return wrong values.
> 
> To solve this, pass the ETIMEDOUT error up from ocores_process_polling()
> instead of setting STATE_ERROR directly. The caller is adjusted to call
> ocores_process_timeout() on error both in polling and in IRQ mode, which
> will set STATE_ERROR and generate a stop condition.
> 
> Fixes: 69c8c0c0efa8 ("i2c: ocores: add polling interface")
> Signed-off-by: Gregor Herburger <gregor.herburger@xxxxxxxxxxxx>
> Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>

Applied to for-current, thanks everyone!

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux