Hi, This patch series adds I2C support for MT8365-EVK board. The I2C-0 is enabled, it can be used through the board pin header, as described directly on the PCB. This series depends to another one which add support for MT8365 SoC and EVK board. Link [1] This dependancy has been applied by Matthias Brugger [3] One patch has been cherry-picked from [2], so I've addressed the comment and kept the trailer. Regards, Alex [1]: https://lore.kernel.org/linux-mediatek/20230101220149.3035048-1-bero@xxxxxxxxxxxx/ [2]: https://lore.kernel.org/all/20220531135026.238475-2-fparent@xxxxxxxxxxxx/ [3]: https://lore.kernel.org/all/ed1f9faf-cb4f-9ff1-ab6b-813035a051bd@xxxxxxxxx/ Signed-off-by: Alexandre Mergnat <amergnat@xxxxxxxxxxxx> --- Changes in v5: - Remove mediatek,drive-strength-adv which is a deprecated pin-control property. - Link to v4: https://lore.kernel.org/r/20221122-mt8365-i2c-support-v4-0-885ad3301d5a@xxxxxxxxxxxx Changes in v4: - Fix some properties order. - Remove the useless properties. - Link to v3: https://lore.kernel.org/r/20221122-mt8365-i2c-support-v3-0-ad9bb1076d7f@xxxxxxxxxxxx Changes in v3: - Rebased to v6.3-rc1. - Move i2c3 node to be consistent with the SoC address order. - Link to v2: https://lore.kernel.org/r/20221122-mt8365-i2c-support-v2-0-e4c7c514e781@xxxxxxxxxxxx Changes in v2: - Drop the patch which do useless change in i2c-mt65xx.c driver. - Change 2 lines compatible/reg in oneline. - Link to v1: https://lore.kernel.org/r/20221122-mt8365-i2c-support-v1-0-4aeb7c54c67b@xxxxxxxxxxxx --- Alexandre Mergnat (2): arm64: dts: mediatek: add i2c support for mt8365 SoC arm64: dts: mediatek: enable i2c0 for mt8365-evk board arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 16 ++++++++++ arch/arm64/boot/dts/mediatek/mt8365.dtsi | 48 +++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+) --- base-commit: 5c6b974d24c21a6aa5d8b524067d7d9bc7fcc4f2 change-id: 20221122-mt8365-i2c-support-fc048da261ea Best regards, -- Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
