[PATCH v1 05/18] arm64: dts: mediatek: mt6795: Add nodes for I2C controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add all four I2C controller nodes but keep them in disabled state as
usage is board-dependant.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt6795.dtsi | 60 ++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index 26d640e1bfb6..ceb6fc948d8a 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -445,6 +445,66 @@ uart3: serial@11005000 {
 			status = "disabled";
 		};
 
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11007000 0 0x70>, <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11008000 0 0x70>, <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11009000 0 0x70>, <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11010000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11010000 0 0x70>, <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C3>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11011000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11011000 0 0x70>, <0 0x11000300 0 0x80>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C4>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		mmc0: mmc@11230000 {
 			compatible = "mediatek,mt6795-mmc";
 			reg = <0 0x11230000 0 0x1000>;
-- 
2.40.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux