Update I2C timing registers based on latest hardware design.
This fix does not break functionality of chips with older design and
existing users will not be affected.
Fixes: 361693697249 ("i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch")
Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@xxxxxxxxxxxxx>
---
v0 -> v1:
- Update commit description as per review comments
---
drivers/i2c/busses/i2c-mchp-pci1xxxx.c | 60 +++++++++++++-------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mchp-pci1xxxx.c b/drivers/i2c/busses/i2c-mchp-pci1xxxx.c
index 09af75921147..b21ffd6df927 100644
--- a/drivers/i2c/busses/i2c-mchp-pci1xxxx.c
+++ b/drivers/i2c/busses/i2c-mchp-pci1xxxx.c
@@ -48,9 +48,9 @@
* SR_HOLD_TIME_XK_TICKS field will indicate the number of ticks of the
* baud clock required to program 'Hold Time' at X KHz.
*/
-#define SR_HOLD_TIME_100K_TICKS 133
-#define SR_HOLD_TIME_400K_TICKS 20
-#define SR_HOLD_TIME_1000K_TICKS 11
+#define SR_HOLD_TIME_100K_TICKS 150
+#define SR_HOLD_TIME_400K_TICKS 20
+#define SR_HOLD_TIME_1000K_TICKS 12
#define SMB_CORE_COMPLETION_REG_OFF3 (SMBUS_MAST_CORE_ADDR_BASE + 0x23)
@@ -65,17 +65,17 @@
* the baud clock required to program 'fair idle delay' at X KHz. Fair idle
* delay establishes the MCTP T(IDLE_DELAY) period.
*/
-#define FAIR_BUS_IDLE_MIN_100K_TICKS 969
-#define FAIR_BUS_IDLE_MIN_400K_TICKS 157
-#define FAIR_BUS_IDLE_MIN_1000K_TICKS 157
+#define FAIR_BUS_IDLE_MIN_100K_TICKS 992
+#define FAIR_BUS_IDLE_MIN_400K_TICKS 500
+#define FAIR_BUS_IDLE_MIN_1000K_TICKS 500
/*
* FAIR_IDLE_DELAY_XK_TICKS field will indicate the number of ticks of the
* baud clock required to satisfy the fairness protocol at X KHz.
*/
-#define FAIR_IDLE_DELAY_100K_TICKS 1000
-#define FAIR_IDLE_DELAY_400K_TICKS 500
-#define FAIR_IDLE_DELAY_1000K_TICKS 500
+#define FAIR_IDLE_DELAY_100K_TICKS 963
+#define FAIR_IDLE_DELAY_400K_TICKS 156
+#define FAIR_IDLE_DELAY_1000K_TICKS 156
#define SMB_IDLE_SCALING_100K \
((FAIR_IDLE_DELAY_100K_TICKS << 16) | FAIR_BUS_IDLE_MIN_100K_TICKS)
@@ -105,7 +105,7 @@
*/
#define BUS_CLK_100K_LOW_PERIOD_TICKS 156
#define BUS_CLK_400K_LOW_PERIOD_TICKS 41
-#define BUS_CLK_1000K_LOW_PERIOD_TICKS 15
+#define BUS_CLK_1000K_LOW_PERIOD_TICKS 15
/*
* BUS_CLK_XK_HIGH_PERIOD_TICKS field defines the number of I2C Baud Clock
@@ -131,7 +131,7 @@
*/
#define CLK_SYNC_100K 4
#define CLK_SYNC_400K 4
-#define CLK_SYNC_1000K 4
+#define CLK_SYNC_1000K 4
#define SMB_CORE_DATA_TIMING_REG_OFF (SMBUS_MAST_CORE_ADDR_BASE + 0x40)
@@ -142,25 +142,25 @@
* determines the SCLK hold time following SDAT driven low during the first
* START bit in a transfer.
*/
-#define FIRST_START_HOLD_100K_TICKS 22
-#define FIRST_START_HOLD_400K_TICKS 16
-#define FIRST_START_HOLD_1000K_TICKS 6
+#define FIRST_START_HOLD_100K_TICKS 23
+#define FIRST_START_HOLD_400K_TICKS 8
+#define FIRST_START_HOLD_1000K_TICKS 12
/*
* STOP_SETUP_XK_TICKS will indicate the number of ticks of the baud clock
* required to program 'STOP_SETUP' timer at X KHz. This timer determines the
* SDAT setup time from the rising edge of SCLK for a STOP condition.
*/
-#define STOP_SETUP_100K_TICKS 157
+#define STOP_SETUP_100K_TICKS 150
#define STOP_SETUP_400K_TICKS 20
-#define STOP_SETUP_1000K_TICKS 12
+#define STOP_SETUP_1000K_TICKS 12
/*
* RESTART_SETUP_XK_TICKS will indicate the number of ticks of the baud clock
* required to program 'RESTART_SETUP' timer at X KHz. This timer determines the
* SDAT setup time from the rising edge of SCLK for a repeated START condition.
*/
-#define RESTART_SETUP_100K_TICKS 157
+#define RESTART_SETUP_100K_TICKS 156
#define RESTART_SETUP_400K_TICKS 20
#define RESTART_SETUP_1000K_TICKS 12
@@ -169,7 +169,7 @@
* required to program 'DATA_HOLD' timer at X KHz. This timer determines the
* SDAT hold time following SCLK driven low.
*/
-#define DATA_HOLD_100K_TICKS 2
+#define DATA_HOLD_100K_TICKS 12
#define DATA_HOLD_400K_TICKS 2
#define DATA_HOLD_1000K_TICKS 2
@@ -190,35 +190,35 @@
* Bus Idle Minimum time = BUS_IDLE_MIN[7:0] x Baud_Clock_Period x
* (BUS_IDLE_MIN_XK_TICKS[7] ? 4,1)
*/
-#define BUS_IDLE_MIN_100K_TICKS 167UL
-#define BUS_IDLE_MIN_400K_TICKS 139UL
-#define BUS_IDLE_MIN_1000K_TICKS 133UL
+#define BUS_IDLE_MIN_100K_TICKS 36UL
+#define BUS_IDLE_MIN_400K_TICKS 10UL
+#define BUS_IDLE_MIN_1000K_TICKS 4UL
/*
* CTRL_CUM_TIME_OUT_XK_TICKS defines SMBus Controller Cumulative Time-Out.
* SMBus Controller Cumulative Time-Out duration =
* CTRL_CUM_TIME_OUT_XK_TICKS[7:0] x Baud_Clock_Period x 2048
*/
-#define CTRL_CUM_TIME_OUT_100K_TICKS 159
-#define CTRL_CUM_TIME_OUT_400K_TICKS 159
-#define CTRL_CUM_TIME_OUT_1000K_TICKS 159
+#define CTRL_CUM_TIME_OUT_100K_TICKS 76
+#define CTRL_CUM_TIME_OUT_400K_TICKS 76
+#define CTRL_CUM_TIME_OUT_1000K_TICKS 76
/*
* TARGET_CUM_TIME_OUT_XK_TICKS defines SMBus Target Cumulative Time-Out duration.
* SMBus Target Cumulative Time-Out duration = TARGET_CUM_TIME_OUT_XK_TICKS[7:0] x
* Baud_Clock_Period x 4096
*/
-#define TARGET_CUM_TIME_OUT_100K_TICKS 199
-#define TARGET_CUM_TIME_OUT_400K_TICKS 199
-#define TARGET_CUM_TIME_OUT_1000K_TICKS 199
+#define TARGET_CUM_TIME_OUT_100K_TICKS 95
+#define TARGET_CUM_TIME_OUT_400K_TICKS 95
+#define TARGET_CUM_TIME_OUT_1000K_TICKS 95
/*
* CLOCK_HIGH_TIME_OUT_XK defines Clock High time out period.
* Clock High time out period = CLOCK_HIGH_TIME_OUT_XK[7:0] x Baud_Clock_Period x 8
*/
-#define CLOCK_HIGH_TIME_OUT_100K_TICKS 204
-#define CLOCK_HIGH_TIME_OUT_400K_TICKS 204
-#define CLOCK_HIGH_TIME_OUT_1000K_TICKS 204
+#define CLOCK_HIGH_TIME_OUT_100K_TICKS 97
+#define CLOCK_HIGH_TIME_OUT_400K_TICKS 97
+#define CLOCK_HIGH_TIME_OUT_1000K_TICKS 97
#define TO_SCALING_100K \
((BUS_IDLE_MIN_100K_TICKS << 24) | (CTRL_CUM_TIME_OUT_100K_TICKS << 16) | \
--
2.25.1
