"of_property_read_u32()" is preferred to "of_get_property()" for
retreiving u32 from the device tree. Replace it.
Suggested-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-mpc.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 81ac92bb4f6f..87e5c1725750 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -770,7 +770,6 @@ static const struct i2c_algorithm mpc_algo = {
static struct i2c_adapter mpc_ops = {
.owner = THIS_MODULE,
.algo = &mpc_algo,
- .timeout = HZ,
};
static struct i2c_bus_recovery_info fsl_i2c_recovery_info = {
@@ -781,11 +780,9 @@ static int fsl_i2c_probe(struct platform_device *op)
{
const struct mpc_i2c_data *data;
struct mpc_i2c *i2c;
- const u32 *prop;
- u32 clock = MPC_I2C_CLOCK_LEGACY;
- int result = 0;
- int plen;
struct clk *clk;
+ int result;
+ u32 clock;
int err;
i2c = devm_kzalloc(&op->dev, sizeof(*i2c), GFP_KERNEL);
@@ -831,10 +828,10 @@ static int fsl_i2c_probe(struct platform_device *op)
if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) {
clock = MPC_I2C_CLOCK_PRESERVE;
} else {
- prop = of_get_property(op->dev.of_node, "clock-frequency",
- &plen);
- if (prop && plen == sizeof(u32))
- clock = *prop;
+ result = of_property_read_u32(op->dev.of_node,
+ "clock-frequency", &clock);
+ if (result)
+ clock = MPC_I2C_CLOCK_LEGACY;
}
data = device_get_match_data(&op->dev);
@@ -846,12 +843,16 @@ static int fsl_i2c_probe(struct platform_device *op)
mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
}
- prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
- if (prop && plen == sizeof(u32)) {
- mpc_ops.timeout = *prop * HZ / 1000000;
+ result = of_property_read_u32(op->dev.of_node,
+ "fsl,timeout", &mpc_ops.timeout);
+ if (!result) {
+ mpc_ops.timeout *= HZ / 1000000;
if (mpc_ops.timeout < 5)
mpc_ops.timeout = 5;
+ } else {
+ mpc_ops.timeout = HZ;
}
+
dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447"))
--
2.39.2
