From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/iio/proximity/srf08.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/proximity/srf08.c b/drivers/iio/proximity/srf08.c
index 7ed11339c31e..61866d0440f7 100644
--- a/drivers/iio/proximity/srf08.c
+++ b/drivers/iio/proximity/srf08.c
@@ -443,9 +443,9 @@ static const struct iio_info srf02_info = {
.read_raw = srf08_read_raw,
};
-static int srf08_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int srf08_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct iio_dev *indio_dev;
struct srf08_data *data;
int ret;
@@ -549,7 +549,7 @@ static struct i2c_driver srf08_driver = {
.name = "srf08",
.of_match_table = of_srf08_match,
},
- .probe = srf08_probe,
+ .probe_new = srf08_probe,
.id_table = srf08_id,
};
module_i2c_driver(srf08_driver);
--
2.38.1
