From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/iio/magnetometer/mag3110.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
index b870ad803862..661176a885ad 100644
--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -469,9 +469,9 @@ static const struct iio_info mag3110_info = {
static const unsigned long mag3110_scan_masks[] = {0x7, 0xf, 0};
-static int mag3110_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int mag3110_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct mag3110_data *data;
struct iio_dev *indio_dev;
int ret;
@@ -641,7 +641,7 @@ static struct i2c_driver mag3110_driver = {
.of_match_table = mag3110_of_match,
.pm = pm_sleep_ptr(&mag3110_pm_ops),
},
- .probe = mag3110_probe,
+ .probe_new = mag3110_probe,
.remove = mag3110_remove,
.id_table = mag3110_id,
};
--
2.38.1
