From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/media/i2c/tlv320aic23b.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/tlv320aic23b.c b/drivers/media/i2c/tlv320aic23b.c
index 937fa1dbaecb..47198e803817 100644
--- a/drivers/media/i2c/tlv320aic23b.c
+++ b/drivers/media/i2c/tlv320aic23b.c
@@ -129,8 +129,7 @@ static const struct v4l2_subdev_ops tlv320aic23b_ops = {
* concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
*/
-static int tlv320aic23b_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int tlv320aic23b_probe(struct i2c_client *client)
{
struct tlv320aic23b_state *state;
struct v4l2_subdev *sd;
@@ -198,7 +197,7 @@ static struct i2c_driver tlv320aic23b_driver = {
.driver = {
.name = "tlv320aic23b",
},
- .probe = tlv320aic23b_probe,
+ .probe_new = tlv320aic23b_probe,
.remove = tlv320aic23b_remove,
.id_table = tlv320aic23b_id,
};
--
2.38.1
