From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/iio/pressure/dps310.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c
index 984a3f511a1a..2af275a24ff9 100644
--- a/drivers/iio/pressure/dps310.c
+++ b/drivers/iio/pressure/dps310.c
@@ -827,9 +827,9 @@ static const struct iio_info dps310_info = {
.write_raw = dps310_write_raw,
};
-static int dps310_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int dps310_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct dps310_data *data;
struct iio_dev *iio;
int rc;
@@ -887,7 +887,7 @@ static struct i2c_driver dps310_driver = {
.name = DPS310_DEV_NAME,
.acpi_match_table = dps310_acpi_match,
},
- .probe = dps310_probe,
+ .probe_new = dps310_probe,
.id_table = dps310_id,
};
module_i2c_driver(dps310_driver);
--
2.38.1
