[PATCH 170/606] iio: pressure: hp206c: Convert to i2c's .probe_new()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
 drivers/iio/pressure/hp206c.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c
index 986b7a59712e..b6d2ff464341 100644
--- a/drivers/iio/pressure/hp206c.c
+++ b/drivers/iio/pressure/hp206c.c
@@ -352,9 +352,9 @@ static const struct iio_info hp206c_info = {
 	.write_raw = hp206c_write_raw,
 };
 
-static int hp206c_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int hp206c_probe(struct i2c_client *client)
 {
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
 	struct iio_dev *indio_dev;
 	struct hp206c_data *data;
 	int ret;
@@ -409,7 +409,7 @@ MODULE_DEVICE_TABLE(acpi, hp206c_acpi_match);
 #endif
 
 static struct i2c_driver hp206c_driver = {
-	.probe = hp206c_probe,
+	.probe_new = hp206c_probe,
 	.id_table = hp206c_id,
 	.driver = {
 		.name = "hp206c",
-- 
2.38.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux