[PATCH 165/606] iio: pressure: abp060mg: Convert to i2c's .probe_new()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
 drivers/iio/pressure/abp060mg.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/pressure/abp060mg.c b/drivers/iio/pressure/abp060mg.c
index e1c3bdb371ee..c0140779366a 100644
--- a/drivers/iio/pressure/abp060mg.c
+++ b/drivers/iio/pressure/abp060mg.c
@@ -174,9 +174,9 @@ static void abp060mg_init_device(struct iio_dev *indio_dev, unsigned long id)
 		state->offset -= ABP060MG_NUM_COUNTS >> 1;
 }
 
-static int abp060mg_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int abp060mg_probe(struct i2c_client *client)
 {
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
 	struct iio_dev *indio_dev;
 	struct abp_state *state;
 	unsigned long cfg_id = id->driver_data;
@@ -255,7 +255,7 @@ static struct i2c_driver abp060mg_driver = {
 	.driver = {
 		.name = "abp060mg",
 	},
-	.probe = abp060mg_probe,
+	.probe_new = abp060mg_probe,
 	.id_table = abp060mg_id_table,
 };
 module_i2c_driver(abp060mg_driver);
-- 
2.38.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux