From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/iio/accel/mma8452.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 3ba28c2ff68a..f97fb68e3a71 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1545,9 +1545,9 @@ static const struct of_device_id mma8452_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, mma8452_dt_ids);
-static int mma8452_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int mma8452_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct mma8452_data *data;
struct iio_dev *indio_dev;
int ret;
@@ -1846,7 +1846,7 @@ static struct i2c_driver mma8452_driver = {
.of_match_table = mma8452_dt_ids,
.pm = &mma8452_pm_ops,
},
- .probe = mma8452_probe,
+ .probe_new = mma8452_probe,
.remove = mma8452_remove,
.id_table = mma8452_id,
};
--
2.38.1
