Re: [PATCH 4/6] soc: qcom: geni-se: add support for I2C Master Hub wrapper variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 16/11/2022 11:21, Neil Armstrong wrote:
The I2C Master Hub is a stripped down version of the GENI Serial Engine
QUP Wrapper Controller but only supporting I2C serial engines without
DMA support.

This adds the clock list for the I2C Master Hub variant to a new desc
struct then passes it through the I2C Master Hub compatible match data.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
  drivers/soc/qcom/qcom-geni-se.c | 10 ++++++++++
  1 file changed, 10 insertions(+)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index f4f54d92a01a..8430a0192bb9 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -930,8 +930,18 @@ static const struct geni_se_desc qup_desc = {
  	.num_clks = ARRAY_SIZE(qup_clks),
  };
+static const char * const i2c_master_hub_clks[] = {
+	"s-ahb",
+};
+
+static const struct geni_se_desc i2c_master_hub_desc = {
+	.clks = i2c_master_hub_clks,
+	.num_clks = ARRAY_SIZE(i2c_master_hub_clks),
+};
+
  static const struct of_device_id geni_se_dt_match[] = {
  	{ .compatible = "qcom,geni-se-qup", .data = &qup_desc },
+	{ .compatible = "qcom,geni-se-i2c-master-hub", .data = &i2c_master_hub_desc },
  	{}
  };
  MODULE_DEVICE_TABLE(of, geni_se_dt_match);




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux