Hi Tomi,
On Tue, 1 Nov 2022 15:20:27 +0200
Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx> wrote:
> Add DT bindings for TI DS90UB960 FPDLink-3 Deserializer.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
...
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c {
> + clock-frequency = <400000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + deser@3d {
> + compatible = "ti,ds90ub960-q1";
> +
> + reg-names = "main";
> + reg = <0x3d>;
> +
> + clock-names = "refclk";
> + clocks = <&fixed_clock>;
> +
> + powerdown-gpios = <&pca9555 7 GPIO_ACTIVE_LOW>;
> +
> + i2c-alias-pool = /bits/ 16 <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Port 0, Camera 0 */
> + port@0 {
> + reg = <0>;
> +
> + ub960_fpd3_1_in: endpoint {
> + remote-endpoint = <&ub953_1_out>;
> +
> + rx-mode = <0>;
> + };
> + };
> +
> + /* Port 0, Camera 1 */
I guess you mean "Port 1" here.
--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
