It is kind of needless to print interrupt status when code immediately after that finds interrupt was not originating from this device. Therefore move it after spurious interrupt detection. Signed-off-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/i2c/busses/i2c-designware-master.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index d6fcf955dfc0..9c2c9d002dc3 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -775,11 +775,11 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) regmap_read(dev->map, DW_IC_ENABLE, &enabled); regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat); - dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat); if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY)) return IRQ_NONE; if (pm_runtime_suspended(dev->dev) || stat == GENMASK(31, 0)) return IRQ_NONE; + dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat); i2c_dw_irq_handler_master(dev); -- 2.35.1
