Subject: [PATCH linux-next] i2c: npcm7xx: remove redundant ret variable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: zhang songyi <zhang.songyi@xxxxxxxxxx>

Return value from npcm_i2c_get_slave_addr() directly instead of taking
this in another redundant variable.

Reported-by: Zeal Robot <zealci@xxxxxxxxxx>
Signed-off-by: zhang songyi <zhang.songyi@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-npcm7xx.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index bbc7359e67f7..772967862003 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -858,14 +858,10 @@ static void npcm_i2c_master_abort(struct npcm_i2c *bus)
 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 static u8 npcm_i2c_get_slave_addr(struct npcm_i2c *bus, enum i2c_addr addr_type)
 {
-   u8 slave_add;
-
    if (addr_type > I2C_SLAVE_ADDR2 && addr_type <= I2C_SLAVE_ADDR10)
        dev_err(bus->dev, "get slave: try to use more than 2 SA not supported\n");

-   slave_add = ioread8(bus->reg + npcm_i2caddr[(int)addr_type]);
-
-   return slave_add;
+   return ioread8(bus->reg + npcm_i2caddr[(int)addr_type]);
 }

 static int npcm_i2c_remove_slave_addr(struct npcm_i2c *bus, u8 slave_add)
--
2.15.2



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux