Re: [PATCH 10/11] usb: host: xhci-tegra: Add Tegra234 XHCI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28/10/2022 14:39, Thierry Reding wrote:

...

+static const struct tegra_xusb_soc tegra234_soc = {
+	.firmware = "nvidia/tegra234/xusb.bin",
+	.supply_names = tegra194_supply_names,
+	.num_supplies = ARRAY_SIZE(tegra194_supply_names),
+	.phy_types = tegra194_phy_types,
+	.num_types = ARRAY_SIZE(tegra194_phy_types),
+	.context = &tegra186_xusb_context,
+	.ports = {
+		.usb3 = { .offset = 0, .count = 4, },
+		.usb2 = { .offset = 4, .count = 4, },
+	},
+	.scale_ss_clock = false,
+	.has_ipfs = false,
+	.otg_reset_sspi = false,
+	.ops = &tegra234_ops,
+	.mbox = {
+		.cmd = XUSB_BAR2_ARU_MBOX_CMD,
+		.data_in = XUSB_BAR2_ARU_MBOX_DATA_IN,
+		.data_out = XUSB_BAR2_ARU_MBOX_DATA_OUT,
+		.owner = XUSB_BAR2_ARU_MBOX_OWNER,
+		.smi_intr = XUSB_BAR2_ARU_SMI_INTR,
+	},
+	.lpm_support = true,
+	.has_bar2 = true,
+	.has_ifr = true,
+};
+MODULE_FIRMWARE("nvidia/tegra234/xusb.bin");

Can you prepare a patch to add this firmware to the linux-firmware
repository? I don't see it there yet.


Actually, we should remove the MODULE_FIRMWARE completely for Tegra234. Per the commit message the variable 'has_ifr' is used to indicate if the firmware is loaded by calling request_firmware() or via these IFR registers. I wonder if we need this 'has_ifr' variable if we should just avoid setting the 'firmware' variable for Tegra234 and use this instead of the 'has_ifr'?

Jon

--
nvpublic



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux