[RESEND PATCH v1 0/4] Fixes for the mcp2221 HID-to-I2C-bridge driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In this patch series are fixes for issues I found during recent tests of
an MCP2221 board.

- you can confuse the kernel driver when using the chip from user mode
  via /dev/hidrawX, typically leading to a NULL pointer dereference in
  the driver's HID raw event handler

- the driver needs > 15s to initialize because the HID raw handling is
  not enabled during initialization of the GPIO part

- data shared with the bottom half code is not protected from concurrent
  access

- the rxbuf pointer can become invalid or even stale if the device would
  send unsolicited reports

Enrik Berkhan (4):
  HID: mcp2221: don't connect hidraw
  HID: mcp2221: enable HID I/O during GPIO probe
  HID: mcp2221: protect shared data with spin lock
  HID: mcp2221: avoid stale rxbuf pointer

 drivers/hid/hid-mcp2221.c | 114 ++++++++++++++++++++++++++++++++------
 1 file changed, 97 insertions(+), 17 deletions(-)
---

Resend because I had a typo in the linux-input mailing list address.
Also adding linux-kernel to increase visibility.

-- 
2.34.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux