-Added standard mode for AXI I2C controller. -Added Smbus block read support to xiic driver. -Added 'xlnx,axi-iic-2.1' new IP version support. -Added dynamic SCL frequency configuration support. -Removed 'local_irq_save/restore' calls as discussed here: https://www.spinics.net/lists/linux-i2c/msg46483.html. -Corrected the BNB interrupt enable sequence. Raviteja Narayanam (11): i2c: xiic: Add standard mode support for > 255 byte read transfers i2c: xiic: Enter standard mode only for > 255 byte read transfers i2c: xiic: Fix Rx and Tx paths in standard mode repeated start i2c: xiic: Add wait for FIFO empty in send_tx i2c: xiic: Use 'nmsgs' variable instead of repeated_start i2c: xiic: Add smbus_block_read functionality i2c: xiic: Switch to Xiic standard mode for i2c-read i2c: xiic: Remove interrupt enable/disable in Rx path dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible i2c: xiic: Update compatible with new IP version i2c: xiic: Add SCL frequency configuration support Srinivas Goud (1): i2c: xiic: Correct the BNB interrupt enable sequence .../bindings/i2c/xlnx,xps-iic-2.00.a.yaml | 4 +- drivers/i2c/busses/i2c-xiic.c | 631 ++++++++++++++++-- 2 files changed, 578 insertions(+), 57 deletions(-) -- 2.25.1
