From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Convert the mmc-spi-slot text based binding doc to yaml,
with the side effect of cleaning up some of the riscv
dtbs_check warnings.
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
.../devicetree/bindings/mmc/mmc-spi-slot.txt | 29 -------
.../devicetree/bindings/mmc/mmc-spi-slot.yaml | 79 +++++++++++++++++++
2 files changed, 79 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
create mode 100644 Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
deleted file mode 100644
index 5e74db69f581..000000000000
--- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-MMC/SD/SDIO slot directly connected to a SPI bus
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the mmc_spi driver.
-
-Required properties:
-- spi-max-frequency : maximum frequency for this device (Hz).
-
-Optional properties:
-- voltage-ranges : two cells are required, first cell specifies minimum
- slot voltage (mV), second cell specifies maximum slot voltage (mV).
- Several ranges could be specified. If not provided, 3.2v..3.4v is assumed.
-- gpios : may specify GPIOs in this order: Card-Detect GPIO,
- Write-Protect GPIO. Note that this does not follow the
- binding from mmc.txt, for historical reasons.
-
-Example:
-
- mmc-slot@0 {
- compatible = "fsl,mpc8323rdb-mmc-slot",
- "mmc-spi-slot";
- reg = <0>;
- gpios = <&qe_pio_d 14 1
- &qe_pio_d 15 0>;
- voltage-ranges = <3300 3300>;
- spi-max-frequency = <50000000>;
- interrupts = <42>;
- interrupt-parent = <&PIC>;
- };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
new file mode 100644
index 000000000000..cf79092de8fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-spi-slot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC/SD/SDIO slot directly connected to a SPI bus
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@xxxxxxxxxx>
+
+allOf:
+ - $ref: "mmc-controller.yaml"
+ - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+description: |
+ The extra properties used by an mmc connected via SPI.
+
+properties:
+ compatible:
+ const: mmc-spi-slot
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency: true
+
+ interrupts:
+ maxItems: 1
+
+ voltage-ranges:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ Two cells are required, first cell specifies minimum slot voltage (mV),
+ second cell specifies maximum slot voltage (mV).
+ items:
+ items:
+ - description: |
+ value for minimum slot voltage
+ default: 3200
+ - description: |
+ value for maximum slot voltage
+ default: 3400
+ maxItems: 1
+
+ gpios:
+ description: |
+ For historical reasons, this does not follow the generic mmc-controller
+ binding.
+ minItems: 1
+ items:
+ - description: Card-Detect GPIO
+ - description: Write-Protect GPIO
+
+required:
+ - compatible
+ - reg
+ - spi-max-frequency
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mmc@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>, <&gpio 15 GPIO_ACTIVE_HIGH>;
+ voltage-ranges = <3300 3300>;
+ spi-max-frequency = <50000000>;
+ interrupts = <42>;
+ interrupt-parent = <&PIC>;
+ };
+ };
+
+...
--
2.36.1
