In the error handling path, the clk_prepare_enable() function call should be balanced by a corresponding 'clk_disable_unprepare()' call, as already done in the remove function. Fixes: 0d676a6c4390 ("i2c: add support for Socionext SynQuacer I2C controller") Signed-off-by: Miaoqian Lin <linmq006@xxxxxxxxx> --- drivers/i2c/busses/i2c-synquacer.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c index e4026c5416b1..cd955224d629 100644 --- a/drivers/i2c/busses/i2c-synquacer.c +++ b/drivers/i2c/busses/i2c-synquacer.c @@ -569,22 +569,27 @@ static int synquacer_i2c_probe(struct platform_device *pdev) i2c->pclkrate > SYNQUACER_I2C_MAX_CLK_RATE) { dev_err(&pdev->dev, "PCLK missing or out of range (%d)\n", i2c->pclkrate); - return -EINVAL; + ret = -EINVAL; + goto err_disable_clk; } i2c->base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(i2c->base)) - return PTR_ERR(i2c->base); + if (IS_ERR(i2c->base)) { + ret = PTR_ERR(i2c->base); + goto err_disable_clk; + } i2c->irq = platform_get_irq(pdev, 0); - if (i2c->irq < 0) - return i2c->irq; + if (i2c->irq < 0) { + ret = i2c->irq; + goto err_disable_clk; + } ret = devm_request_irq(&pdev->dev, i2c->irq, synquacer_i2c_isr, 0, dev_name(&pdev->dev), i2c); if (ret < 0) { dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq); - return ret; + goto err_disable_clk; } i2c->state = STATE_IDLE; @@ -607,7 +612,7 @@ static int synquacer_i2c_probe(struct platform_device *pdev) ret = i2c_add_numbered_adapter(&i2c->adapter); if (ret) { dev_err(&pdev->dev, "failed to add bus to i2c core\n"); - return ret; + goto err_disable_clk; } platform_set_drvdata(pdev, i2c); @@ -616,6 +621,11 @@ static int synquacer_i2c_probe(struct platform_device *pdev) dev_name(&i2c->adapter.dev)); return 0; + +err_disable_clk: + if (!IS_ERR(i2c->pclk)) + clk_disable_unprepare(i2c->pclk); + return ret; } static int synquacer_i2c_remove(struct platform_device *pdev) -- 2.17.1