Convert I2C binding for Atmel/Microchip SoCs to Device Tree Schema format. Signed-off-by: Sergiu Moga <sergiu.moga@xxxxxxxxxxxxx> --- .../bindings/i2c/atmel,at91sam-i2c.yaml | 144 ++++++++++++++++++ .../devicetree/bindings/i2c/i2c-at91.txt | 82 ---------- 2 files changed, 144 insertions(+), 82 deletions(-) create mode 100644 Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-at91.txt diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml new file mode 100644 index 000000000000..d4aadbbd1a11 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C for Atmel/Microchip platforms + +maintainers: + - Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> + +allOf: + - $ref: "i2c-controller.yaml" + - if: + properties: + compatible: + contains: + enum: + - atmel,sama5d4-i2c + - atmel,sama5d2-i2c + - microchip,sam9x60-i2c + then: + properties: + i2c-sda-hold-time-ns: + description: + TWD hold time + maxItems: 1 + +properties: + compatible: + enum: + - atmel,at91rm9200-i2c + - atmel,at91sam9261-i2c + - atmel,at91sam9260-i2c + - atmel,at91sam9g20-i2c + - atmel,at91sam9g10-i2c + - atmel,at91sam9x5-i2c + - atmel,sama5d4-i2c + - atmel,sama5d2-i2c + - microchip,sam9x60-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-frequency: + default: 100000 + + dmas: + items: + - description: TX DMA Channel Specifier + - description: RX DMA Channel Specifier + + dma-names: + items: + - const: tx + - const: rx + + atmel,fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Maximum number of data the RX and TX FIFOs can store for + FIFO capable I2C controllers. + + scl-gpios: true + + sda-gpios: true + + pinctrl: + description: | + Add extra pinctrl to configure i2c pins to gpio function for i2c + bus recovery, call it "gpio" state + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/gpio/gpio.h> + + i2c0: i2c@fff84000 { + compatible = "atmel,at91sam9g20-i2c"; + reg = <0xfff84000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + pagesize = <128>; + }; + }; + + i2c1: i2c@f8034600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0xf8034600 0x100>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(11)>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(12)>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx0>; + atmel,fifo-size = <16>; + i2c-sda-hold-time-ns = <336>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + eeprom@1a { + compatible = "wm8731"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt deleted file mode 100644 index 2015f50aed0f..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ /dev/null @@ -1,82 +0,0 @@ -I2C for Atmel platforms - -Required properties : -- compatible : Must be one of: - "atmel,at91rm9200-i2c", - "atmel,at91sam9261-i2c", - "atmel,at91sam9260-i2c", - "atmel,at91sam9g20-i2c", - "atmel,at91sam9g10-i2c", - "atmel,at91sam9x5-i2c", - "atmel,sama5d4-i2c", - "atmel,sama5d2-i2c", - "microchip,sam9x60-i2c". -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: interrupt number to the cpu. -- #address-cells = <1>; -- #size-cells = <0>; -- clocks: phandles to input clocks. - -Optional properties: -- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000 -- dmas: A list of two dma specifiers, one for each entry in dma-names. -- dma-names: should contain "tx" and "rx". -- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO - capable I2C controllers. -- i2c-sda-hold-time-ns: TWD hold time, only available for: - "atmel,sama5d4-i2c", - "atmel,sama5d2-i2c", - "microchip,sam9x60-i2c". -- scl-gpios: specify the gpio related to SCL pin -- sda-gpios: specify the gpio related to SDA pin -- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c - bus recovery, call it "gpio" state -- Child nodes conforming to i2c bus binding - - -Examples : - -i2c0: i2c@fff84000 { - compatible = "atmel,at91sam9g20-i2c"; - reg = <0xfff84000 0x100>; - interrupts = <12 4 6>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&twi0_clk>; - clock-frequency = <400000>; - - 24c512@50 { - compatible = "atmel,24c512"; - reg = <0x50>; - pagesize = <128>; - } -} - -i2c0: i2c@f8034600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0xf8034600 0x100>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(11)>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(12)>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&flx0>; - atmel,fifo-size = <16>; - i2c-sda-hold-time-ns = <336>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c0>; - pinctrl-1 = <&pinctrl_i2c0_gpio>; - sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - wm8731: wm8731@1a { - compatible = "wm8731"; - reg = <0x1a>; - }; -}; -- 2.25.1
