Value for getting frequency capability wrongly has been taken from
register offset instead of register value.
Fixes: 66b0c2846ba8 ("i2c: mlxcpld: Add support for I2C bus frequency setting")
Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-mlxcpld.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c
index 4e0b7c2882ce..6d41c3db8a2b 100644
--- a/drivers/i2c/busses/i2c-mlxcpld.c
+++ b/drivers/i2c/busses/i2c-mlxcpld.c
@@ -495,7 +495,7 @@ mlxcpld_i2c_set_frequency(struct mlxcpld_i2c_priv *priv,
return err;
/* Set frequency only if it is not 100KHz, which is default. */
- switch ((data->reg & data->mask) >> data->bit) {
+ switch ((regval & data->mask) >> data->bit) {
case MLXCPLD_I2C_FREQ_1000KHZ:
freq = MLXCPLD_I2C_FREQ_1000KHZ_SET;
break;
--
2.20.1
