Hi,
Currently the DT only provides support for following node types for virtio-mmio
nodes:
virtio_mmio@a000000 {
dma-coherent;
interrupts = <0x00 0x10 0x01>;
reg = <0x00 0xa000000 0x00 0x200>;
compatible = "virtio,mmio";
};
Here, each virtio-mmio corresponds to a virtio-device. But there is no way for
other users in the DT to show their dependency on virtio devices.
This patchset provides that support.
The first patch adds virtio-device bindings to allow for device sub-nodes to be
present and the second patch updates the virtio core to update the of_node.
Other patches add bindings for i2c and gpio devices.
Tested on x86 with qemu for arm64.
V1->V2:
- The changes (both binding and code) are made at virtio level, instead of
virtio-mmio. This allows the same to be used by all device types, irrespective
of the transport mechanism.
- Dropped the reg property and used compatible in the form "virtio,<DID>".
- Dropped dt-bindings/virtio/virtio_ids.h.
- Add a patch to sync virtio-ids from spec, required for the last patch.
--
Viresh
Viresh Kumar (5):
dt-bindings: virtio: Add binding for virtio devices
dt-bindings: i2c: Add bindings for i2c-virtio
dt-bindings: gpio: Add bindings for gpio-virtio
uapi: virtio_ids: Sync ids with specification
virtio: Bind virtio device to device-tree node
.../devicetree/bindings/gpio/gpio-virtio.yaml | 60 +++++++++++++++++
.../devicetree/bindings/i2c/i2c-virtio.yaml | 51 ++++++++++++++
.../devicetree/bindings/virtio/mmio.yaml | 2 +-
.../bindings/virtio/virtio-device.yaml | 47 +++++++++++++
drivers/virtio/virtio.c | 67 ++++++++++++++++++-
include/uapi/linux/virtio_ids.h | 12 ++++
6 files changed, 235 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-virtio.yaml
create mode 100644 Documentation/devicetree/bindings/virtio/virtio-device.yaml
--
2.31.1.272.g89b43f80a514
