[PATCH v2 07/10] i2c: xiic: Return value of xiic_reinit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>

Check the return value of xiic_reinit.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-xiic.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 007a78215a90..0d76261f1841 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -504,6 +504,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 	struct xiic_i2c *i2c = dev_id;
 	u32 pend, isr, ier;
 	u32 clr = 0;
+	int ret;
 
 	/* Get the interrupt Status from the IPIF. There is no clearing of
 	 * interrupts in the IPIF. Interrupts must be cleared at the source.
@@ -540,7 +541,9 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 		 * fifos and the next message is a TX with len 0 (only addr)
 		 * reset the IP instead of just flush fifos
 		 */
-		xiic_reinit(i2c);
+		ret = xiic_reinit(i2c);
+		if (!ret)
+			dev_dbg(i2c->adap.dev.parent, "reinit failed\n");
 
 		if (i2c->rx_msg)
 			xiic_wakeup(i2c, STATE_ERROR);
-- 
2.25.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux