Re: [PATCH v2 3/4] x86: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 1, 2021 at 6:26 PM Geert Uytterhoeven
<geert+renesas@xxxxxxxxx> wrote:
>
> The TI part is equivalent to the NXP part, and its compatible value is
> not documented in the DT bindings.
>
> Note that while the Linux driver DT match table does not contain the
> compatible value of the TI part, it could still match to this part, as
> i2c_device_id-based matching ignores the vendor part of the compatible
> value.

LGTM!
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

Maybe at some point I will find the time to resurrect the CE4100 based
device that collects dirt on my desk...

> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> v2:
>   - New.
> ---
>  arch/x86/platform/ce4100/falconfalls.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts
> index 0ac3d43571361112..65fa3d866226ce97 100644
> --- a/arch/x86/platform/ce4100/falconfalls.dts
> +++ b/arch/x86/platform/ce4100/falconfalls.dts
> @@ -249,7 +249,7 @@ i2c@1 {
>
>                                                 gpio@26 {
>                                                         #gpio-cells = <2>;
> -                                                       compatible = "ti,pcf8575";
> +                                                       compatible = "nxp,pcf8575";
>                                                         reg = <0x26>;
>                                                         gpio-controller;
>                                                 };
> @@ -263,7 +263,7 @@ i2c@2 {
>
>                                                 gpio@26 {
>                                                         #gpio-cells = <2>;
> -                                                       compatible = "ti,pcf8575";
> +                                                       compatible = "nxp,pcf8575";
>                                                         reg = <0x26>;
>                                                         gpio-controller;
>                                                 };
> --
> 2.25.1
>


-- 
With Best Regards,
Andy Shevchenko



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux