[PATCH 08/10] i2c: xiic: Remove interrupt enable/disable in Rx path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As the 'DYNAMIC_MODE_READ_BROKEN_BIT' quirk is added in the driver,
we no longer enter dynamic mode for the effected IP versions.
So, remove local_irq_save/local_irq_restore APIs from driver.

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-xiic.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 2f0808249ceb..f022a1885b6a 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -759,7 +759,6 @@ static void xiic_start_recv(struct xiic_i2c *i2c)
 	u16 rx_watermark;
 	u8 cr = 0, rfd_set = 0;
 	struct i2c_msg *msg = i2c->rx_msg = i2c->tx_msg;
-	unsigned long flags;
 
 	dev_dbg(i2c->adap.dev.parent, "%s entry, ISR: 0x%x, CR: 0x%x\n",
 		__func__, xiic_getreg32(i2c, XIIC_IISR_OFFSET),
@@ -790,7 +789,6 @@ static void xiic_start_recv(struct xiic_i2c *i2c)
 
 		xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET, bytes);
 
-		local_irq_save(flags);
 		if (!(msg->flags & I2C_M_NOSTART))
 			/* write the address */
 			xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
@@ -804,7 +802,6 @@ static void xiic_start_recv(struct xiic_i2c *i2c)
 		val |= msg->len;
 
 		xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, val);
-		local_irq_restore(flags);
 	} else {
 		/*
 		 * If previous message is Tx, make sure that Tx FIFO is empty
-- 
2.17.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux