Re: [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The 05/19/2021 19:02, Zev Weiss wrote:
> On Wed, May 19, 2021 at 03:04:27AM CDT, Jamin Lin wrote:
> >The register definition between AST2600 A2 and A3 is different.
> >This patch avoid new registers definition of AST2600 to use
> >this driver. We will submit the path for the new registers
> >definition of AST2600.
> >
> >Signed-off-by: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
> >---
> > drivers/i2c/busses/i2c-aspeed.c | 22 ++++++++++++++++++++++
> > 1 file changed, 22 insertions(+)
> >
> >diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> >index 724bf30600d6..007309077d9f 100644
> >--- a/drivers/i2c/busses/i2c-aspeed.c
> >+++ b/drivers/i2c/busses/i2c-aspeed.c
> >@@ -19,14 +19,20 @@
> > #include <linux/irqchip/chained_irq.h>
> > #include <linux/irqdomain.h>
> > #include <linux/kernel.h>
> >+#include <linux/mfd/syscon.h>
> > #include <linux/module.h>
> > #include <linux/of_address.h>
> > #include <linux/of_irq.h>
> > #include <linux/of_platform.h>
> > #include <linux/platform_device.h>
> >+#include <linux/regmap.h>
> > #include <linux/reset.h>
> > #include <linux/slab.h>
> >
> >+/* I2C Global Registers */
> >+/* 0x0c : I2CG Global Control Register (AST2500)  */
> >+#define ASPEED_I2CG_GLOBAL_CTRL_REG			0x0c
> >+
> > /* I2C Register */
> > #define ASPEED_I2C_FUN_CTRL_REG				0x00
> > #define ASPEED_I2C_AC_TIMING_REG1			0x04
> >@@ -973,6 +979,22 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
> > 	struct resource *res;
> > 	int irq, ret;
> >
> >+	if (of_device_is_compatible(pdev->dev.of_node,
> >+				    "aspeed,ast2600-i2c-bus")) {
> >+		u32 global_ctrl;
> >+		struct regmap *gr_regmap;
> >+
> >+		gr_regmap = syscon_regmap_lookup_by_compatible("aspeed,ast2600-i2c-global");
> >+
> >+		if (IS_ERR(gr_regmap)) {
> >+			ret = PTR_ERR(gr_regmap);
> >+		} else {
> >+			regmap_read(gr_regmap, ASPEED_I2CG_GLOBAL_CTRL_REG, &global_ctrl);
> >+			if (global_ctrl & BIT(2))
> >+				return -EIO;
> 
> A macro definition might be a bit nicer than a raw BIT(2) here I'd
> think.
Will modify 
> 
> Also, it seems a bit unfortunate to just bail on the device entirely if
> we find this bit set (seems like a good way for a bootloader to
> inadvertently DoS the kernel), though I guess poking global syscon bits
> in the bus probe function might not be ideal.  Could/should we consider
> some module-level init code to ensure that bit is cleared?
> 
> 
We use syscon API to get the global register of i2c not the specific i2c
bus.
Can you describe it more detail?
Thanks-Jamin
> Zev
> 
> >+		}
> >+	}
> >+
> > 	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
> > 	if (!bus)
> > 		return -ENOMEM;
> >-- 
> >2.17.1
> >



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux