> From: Clark Wang <xiaoning.wang@xxxxxxx>
> Sent: Tuesday, April 6, 2021 7:33 PM
>
> add debug message when i2c peripheral clk rate is 0, then directly return
> -EINVAL.
>
> Signed-off-by: Clark Wang <xiaoning.wang@xxxxxxx>
You sign-off should be put after the original patch author
> Signed-off-by: Gao Pan <pandy.gao@xxxxxxx>
> Reviewed-by: Andy Duan <fugang.duan@xxxxxxx>
Drop the original review when they're significant changes
> ---
> V2 changes:
> - Add my signed-off.
> ---
> drivers/i2c/busses/i2c-imx-lpi2c.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c
> b/drivers/i2c/busses/i2c-imx-lpi2c.c
> index 333209ba81c1..dfec334712c2 100644
> --- a/drivers/i2c/busses/i2c-imx-lpi2c.c
> +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
> @@ -210,6 +210,11 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct
> *lpi2c_imx)
> lpi2c_imx_set_mode(lpi2c_imx);
>
> clk_rate = clk_get_rate(lpi2c_imx->clk_per);
> + if (!clk_rate) {
> + dev_dbg(&lpi2c_imx->adapter.dev, "clk_per rate is 0\n");
s/dev_dbg/dev_err
> + return -EINVAL;
> + }
> +
> if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
> filt = 0;
> else
> --
> 2.25.1
