RE: [PATCH V2 04/18] ARM: dts: imx7ulp: add the missing lpi2c nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Clark Wang <xiaoning.wang@xxxxxxx>
> Sent: Tuesday, April 6, 2021 7:33 PM
> 
> Add the missing lpi2c4/5 nodes for imx7ulp.
> 
> Signed-off-by: Clark Wang <xiaoning.wang@xxxxxxx>
> ---
> V2 changes:
>  - New patch added in V2
> ---
>  arch/arm/boot/dts/imx7ulp.dtsi | 31 +++++++++++++++++++++++++++++--
>  1 file changed, 29 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
> index eb0d4b8f624d..0c51fa79c0bc 100644
> --- a/arch/arm/boot/dts/imx7ulp.dtsi
> +++ b/arch/arm/boot/dts/imx7ulp.dtsi
> @@ -22,8 +22,10 @@ aliases {
>  		gpio1 = &gpio_ptd;
>  		gpio2 = &gpio_pte;
>  		gpio3 = &gpio_ptf;
> -		i2c0 = &lpi2c6;
> -		i2c1 = &lpi2c7;
> +		i2c0 = &lpi2c4;
> +		i2c1 = &lpi2c5;
> +		i2c2 = &lpi2c6;
> +		i2c3 = &lpi2c7;
>  		mmc0 = &usdhc0;
>  		mmc1 = &usdhc1;
>  		serial0 = &lpuart4;
> @@ -145,6 +147,31 @@ sec_jr1: jr@2000 {
>  			};
>  		};
> 
> +		lpi2c4: lpi2c4@402b0000 {

Generic node name is preferred. E.g. I2c@xxxxx

> +			compatible = "fsl,imx7ulp-lpi2c";
> +			reg = <0x402b0000 0x10000>;
> +			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&pcc2 IMX7ULP_CLK_LPI2C4>,
> +				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
> +			clock-names = "per", "ipg";
> +			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPI2C4>;
> +			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
> +			assigned-clock-rates = <48000000>;
> +			status = "disabled";
> +		};
> +
> +		lpi2c5: lpi2c5@402c0000 {

Ditto

> +			compatible = "fsl,imx7ulp-lpi2c";
> +			reg = <0x402c0000 0x10000>;
> +			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&pcc2 IMX7ULP_CLK_LPI2C5>,
> +				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
> +			clock-names = "per", "ipg";
> +			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPI2C5>;
> +			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
> +			assigned-clock-rates = <48000000>;
> +		};
> +
>  		lpuart4: serial@402d0000 {
>  			compatible = "fsl,imx7ulp-lpuart";
>  			reg = <0x402d0000 0x1000>;
> --
> 2.25.1





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux