Fixes the following W=1 kernel build warning(s):
drivers/i2c/busses/i2c-axxia.c:135: warning: cannot understand function prototype: 'struct axxia_i2c_dev '
drivers/i2c/busses/i2c-axxia.c:172: warning: Function parameter or member 'ns' not described in 'ns_to_clk'
drivers/i2c/busses/i2c-axxia.c:172: warning: Function parameter or member 'clk_mhz' not described in 'ns_to_clk'
drivers/i2c/busses/i2c-axxia.c:271: warning: Function parameter or member 'idev' not described in 'axxia_i2c_empty_rx_fifo'
drivers/i2c/busses/i2c-axxia.c:303: warning: Function parameter or member 'idev' not described in 'axxia_i2c_fill_tx_fifo'
drivers/i2c/busses/i2c-axxia.c:150: warning: Function parameter or member 'slave' not described in 'axxia_i2c_dev'
drivers/i2c/busses/i2c-axxia.c:150: warning: Function parameter or member 'irq' not described in 'axxia_i2c_dev'
Cc: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
Cc: Anders Berg <anders.berg@xxxxxxx>
Cc: linux-i2c@xxxxxxxxxxxxxxx
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-axxia.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index 5294b73beca85..946874e648547 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -117,8 +117,8 @@
#define SDA_SETUP_TIME 0x8c
#define SDA_HOLD_TIME 0x90
-/**
- * axxia_i2c_dev - I2C device context
+/*
+ * struct axxia_i2c_dev - I2C device context
* @base: pointer to register struct
* @msg: pointer to current message
* @msg_r: pointer to current read message (sequence transfer)
@@ -165,7 +165,7 @@ static void i2c_int_enable(struct axxia_i2c_dev *idev, u32 mask)
writel(int_en | mask, idev->base + MST_INT_ENABLE);
}
-/**
+/*
* ns_to_clk - Convert time (ns) to clock cycles for the given clock frequency.
*/
static u32 ns_to_clk(u64 ns, u32 clk_mhz)
@@ -263,7 +263,7 @@ static int i2c_m_recv_len(const struct i2c_msg *msg)
return (msg->flags & I2C_M_RECV_LEN) != 0;
}
-/**
+/*
* axxia_i2c_empty_rx_fifo - Fetch data from RX FIFO and update SMBus block
* transfer length if this is the first byte of such a transfer.
*/
@@ -295,9 +295,8 @@ static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev)
return 0;
}
-/**
+/*
* axxia_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
- * @return: Number of bytes left to transfer.
*/
static int axxia_i2c_fill_tx_fifo(struct axxia_i2c_dev *idev)
{
--
2.31.1
