The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
Notes:
Changes in v3:
- New
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
index c2717f31925a..ccda0a91abf0 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -122,7 +122,15 @@ memory-controller@2000 {
};
/include/ "pq3-i2c-0.dtsi"
+ i2c@3000 {
+ fsl,i2c-erratum-a004447;
+ };
+
/include/ "pq3-i2c-1.dtsi"
+ i2c@3100 {
+ fsl,i2c-erratum-a004447;
+ };
+
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
spi0: spi@7000 {
--
2.31.1
