I2C devices currently are named dynamically using <adapter_id>-<device_address> convention, unless they are instantiated through ACPI. This means the device name may vary for the same device across different systems, infact even on the same system if the I2C bus enumeration order changes, i.e. because of device tree modifications. By adding an optional "dev-name" property, it provides a mechanism to set consistent and easy to recognize names for I2C devices. Signed-off-by: Manish Varma <varmam@xxxxxxxxxx> --- Documentation/devicetree/bindings/i2c/i2c.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index df41f72afc87..6fb03f464b81 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -130,6 +130,11 @@ wants to support one of the below features, it should adapt these bindings. - wakeup-source device can be used as a wakeup source. +- dev-name + Name of the device. + Overrides the default device name which is in the form of + <busnr>-<addr>. + Binding may contain optional "interrupts" property, describing interrupts used by the device. I2C core will assign "irq" interrupt (or the very first interrupt if not using interrupt names) as primary interrupt for the slave. -- 2.31.1.295.g9ea45b61b8-goog
