Re: [PATCH] i2c: mediatek: Get device clock-stretch time via dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
On Tue, 2021-03-02 at 19:30 +0800, Ikjoon Jang wrote:
> Hi Qii,
> >
> > @@ -1171,6 +1173,8 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
> >         if (i2c->clk_src_div == 0)
> >                 return -EINVAL;
> >
> > +       of_property_read_u32(np, "clock-stretch-ns", &i2c->clock_stretch_ns);
> > +
> 
> I think this new property "clock-stretch-ns" is for the same purpose of
> "i2c-scl-falling-time-ns" + "i2c-scl-rising-time-ns" defined in
> Documentation/devicetree/bindings/i2c/i2c.txt?
> 

I haven't find the corresponding instructions;and this patch is for the
problem caused by clock-stretch when the scl is pulled.

> >         i2c->have_pmic = of_property_read_bool(np, "mediatek,have-pmic");
> >         i2c->use_push_pull =
> >                 of_property_read_bool(np, "mediatek,use-push-pull");
> > --
> > 1.9.1
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux