The PM reference count is not expected to be incremented on
return in omap_i2c_probe() and omap_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here. I Replace it with pm_runtime_resume_and_get
to keep usage counter balanced.
What's more, error path 'err_free_mem' seems not like a proper
name any more. So I change the name to err_disable_pm and move
pm_runtime_disable below, for pm_runtime of 'pdev->dev' should
be disabled when pm_runtime_resume_and_get fails.
Fixes: 3b0fb97c8dc4 ("I2C: OMAP: Handle error check for pm runtime")
Reported-by: Hulk Robot <hulkci@xxxxxxxxxx>
Signed-off-by: Qinglang Miao <miaoqinglang@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-omap.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 12ac4212a..d4f6c6d60 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1404,9 +1404,9 @@ omap_i2c_probe(struct platform_device *pdev)
pm_runtime_set_autosuspend_delay(omap->dev, OMAP_I2C_PM_TIMEOUT);
pm_runtime_use_autosuspend(omap->dev);
- r = pm_runtime_get_sync(omap->dev);
+ r = pm_runtime_resume_and_get(omap->dev);
if (r < 0)
- goto err_free_mem;
+ goto err_disable_pm;
/*
* Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
@@ -1513,8 +1513,8 @@ omap_i2c_probe(struct platform_device *pdev)
omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_put_sync(omap->dev);
+err_disable_pm:
pm_runtime_disable(&pdev->dev);
-err_free_mem:
return r;
}
@@ -1525,7 +1525,7 @@ static int omap_i2c_remove(struct platform_device *pdev)
int ret;
i2c_del_adapter(&omap->adapter);
- ret = pm_runtime_get_sync(&pdev->dev);
+ ret = pm_runtime_resume_and_get(&pdev->dev);
if (ret < 0)
return ret;
--
2.23.0
