DMA usage is optional for the I2C driver. check for the -ENODEV error in order to avoid displaying an error when no DMA has been requested. Signed-off-by: Alain Volmat <alain.volmat@xxxxxx> --- This patch should be applied on top of the patch [i2c: stm32: Simplify with dev_err_probe()] --- drivers/i2c/busses/i2c-stm32.c | 16 ++++++++++------ drivers/i2c/busses/i2c-stm32f7.c | 5 +++++ 2 files changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c index 198f848b7be9..91767156d63d 100644 --- a/drivers/i2c/busses/i2c-stm32.c +++ b/drivers/i2c/busses/i2c-stm32.c @@ -25,8 +25,11 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev, /* Request and configure I2C TX dma channel */ dma->chan_tx = dma_request_chan(dev, "tx"); if (IS_ERR(dma->chan_tx)) { - ret = dev_err_probe(dev, PTR_ERR(dma->chan_tx), - "can't request DMA tx channel\n"); + if (PTR_ERR(dma->chan_tx) == -ENODEV) + ret = PTR_ERR(dma->chan_tx); + else + ret = dev_err_probe(dev, PTR_ERR(dma->chan_tx), + "can't request DMA tx channel\n"); goto fail_al; } @@ -44,8 +47,11 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev, /* Request and configure I2C RX dma channel */ dma->chan_rx = dma_request_chan(dev, "rx"); if (IS_ERR(dma->chan_rx)) { - ret = dev_err_probe(dev, PTR_ERR(dma->chan_rx), - "can't request DMA rx channel\n"); + if (PTR_ERR(dma->chan_tx) == -ENODEV) + ret = PTR_ERR(dma->chan_tx); + else + ret = dev_err_probe(dev, PTR_ERR(dma->chan_rx), + "can't request DMA rx channel\n"); goto fail_tx; } @@ -73,8 +79,6 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev, dma_release_channel(dma->chan_tx); fail_al: devm_kfree(dev, dma); - if (ret != -EPROBE_DEFER) - dev_info(dev, "can't use DMA\n"); return ERR_PTR(ret); } diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index a8f1758e4c5b..58f342aea3c1 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -2049,6 +2049,11 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) STM32F7_I2C_TXDR, STM32F7_I2C_RXDR); if (PTR_ERR(i2c_dev->dma) == -ENODEV) { + /* + * DMA usage is not mandatory for the I2C, it is not an error + * to receive -ENODEV + */ + dev_dbg(i2c_dev->dev, "not using DMA\n"); i2c_dev->dma = NULL; } else if (IS_ERR(i2c_dev->dma)) { ret = dev_err_probe(&pdev->dev, PTR_ERR(i2c_dev->dma), -- 2.7.4