[PATCH v2 4/5] ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Set I2C bus 0 to multi-master mode and add the panel device that will
register as a slave.

Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
---
 arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index 5f4ee67ac787..4d070d6ba09f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -4,6 +4,7 @@
 
 #include "aspeed-g6.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
 #include <dt-bindings/leds/leds-pca955x.h>
 
 / {
@@ -438,7 +439,13 @@ aliases {
 };
 
 &i2c0 {
+	multi-master;
 	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
 };
 
 &i2c1 {
-- 
2.26.2




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux