Use a single reset_control_reset() instead of assert/deasset couple in order to make code cleaner a tad. Note that the reset_control_reset() uses 1 microsecond delay instead of 2 that was used previously, but this shouldn't matter. In addition don't ignore potential error of the reset control by emitting a noisy warning if it fails, which shouldn't ever happen in practice. Reviewed-by: Michał Mirosław <mirq-linux@xxxxxxxxxxxx> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx> --- drivers/i2c/busses/i2c-tegra.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 043b5ce52a6e..52e15ec246b3 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -785,9 +785,8 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) u32 tsu_thd; u8 tlow, thigh; - reset_control_assert(i2c_dev->rst); - udelay(2); - reset_control_deassert(i2c_dev->rst); + err = reset_control_reset(i2c_dev->rst); + WARN_ON_ONCE(err); if (i2c_dev->is_dvc) tegra_dvc_init(i2c_dev); -- 2.27.0
