Rename variable "reg" to "val" in order to better reflect the actual usage
of the variable in the code and to make naming consistent with the rest of
the code.
Reviewed-by: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
drivers/i2c/busses/i2c-tegra.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 4436fecee283..8c87382b1612 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1093,20 +1093,20 @@ static unsigned long tegra_i2c_wait_completion(struct tegra_i2c_dev *i2c_dev,
static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
{
struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
- u32 reg, time_left;
+ u32 val, time_left;
int err;
reinit_completion(&i2c_dev->msg_complete);
- reg = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND |
+ val = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND |
I2C_BC_TERMINATE;
- i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG);
+ i2c_writel(i2c_dev, val, I2C_BUS_CLEAR_CNFG);
err = tegra_i2c_wait_for_config_load(i2c_dev);
if (err)
return err;
- reg |= I2C_BC_ENABLE;
- i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG);
+ val |= I2C_BC_ENABLE;
+ i2c_writel(i2c_dev, val, I2C_BUS_CLEAR_CNFG);
tegra_i2c_unmask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
time_left = tegra_i2c_wait_completion(i2c_dev, &i2c_dev->msg_complete,
@@ -1118,8 +1118,8 @@ static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
return -ETIMEDOUT;
}
- reg = i2c_readl(i2c_dev, I2C_BUS_CLEAR_STATUS);
- if (!(reg & I2C_BC_STATUS)) {
+ val = i2c_readl(i2c_dev, I2C_BUS_CLEAR_STATUS);
+ if (!(val & I2C_BC_STATUS)) {
dev_err(i2c_dev->dev,
"un-recovered arbitration lost\n");
return -EIO;
--
2.27.0
