Factor out register polling into a separate function in order to remove boilerplate code and make code cleaner. Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx> --- drivers/i2c/busses/i2c-tegra.c | 43 +++++++++++++++------------------- 1 file changed, 19 insertions(+), 24 deletions(-) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 129ca5a6cb85..68b2be321f9a 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -466,10 +466,24 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev) return err; } +static int tegra_i2c_poll_register(struct tegra_i2c_dev *i2c_dev, + u32 reg, u32 mask, u32 delay_us, + u32 timeout_us) +{ + void __iomem *addr = i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg); + u32 val; + + if (!i2c_dev->is_curr_atomic_xfer) + return readl_relaxed_poll_timeout(addr, val, !(val & mask), + delay_us, timeout_us); + + return readl_relaxed_poll_timeout_atomic(addr, val, !(val & mask), + delay_us, timeout_us); +} + static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev) { - u32 mask, val, offset, reg_offset; - void __iomem *addr; + u32 mask, val, offset; int err; if (i2c_dev->hw->has_mst_fifo) { @@ -486,16 +500,7 @@ static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev) val |= mask; i2c_writel(i2c_dev, val, offset); - reg_offset = tegra_i2c_reg_addr(i2c_dev, offset); - addr = i2c_dev->base + reg_offset; - - if (i2c_dev->is_curr_atomic_xfer) - err = readl_relaxed_poll_timeout_atomic(addr, val, !(val & mask), - 1000, 1000000); - else - err = readl_relaxed_poll_timeout(addr, val, !(val & mask), - 1000, 1000000); - + err = tegra_i2c_poll_register(i2c_dev, offset, mask, 1000, 1000000); if (err) { dev_err(i2c_dev->dev, "failed to flush FIFO\n"); return err; @@ -695,25 +700,15 @@ static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev) static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev) { - unsigned long reg_offset; - void __iomem *addr; - u32 val; int err; if (!i2c_dev->hw->has_config_load_reg) return 0; - reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_CONFIG_LOAD); - addr = i2c_dev->base + reg_offset; i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD); - if (i2c_dev->is_curr_atomic_xfer) - err = readl_relaxed_poll_timeout_atomic(addr, val, val == 0, 1000, - I2C_CONFIG_LOAD_TIMEOUT); - else - err = readl_relaxed_poll_timeout(addr, val, val == 0, 1000, - I2C_CONFIG_LOAD_TIMEOUT); - + err = tegra_i2c_poll_register(i2c_dev, I2C_CONFIG_LOAD, 0xffffffff, + 1000, I2C_CONFIG_LOAD_TIMEOUT); if (err) { dev_warn(i2c_dev->dev, "timeout waiting for config load\n"); return err; -- 2.27.0