Hi Russell,
> Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> .../boot/dts/marvell/armada-3720-uDPU.dts | 22 +++++++++++++++++--
> 1 file changed, 20 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
> index 7eb6c1796cef..95d46e8d081c 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
> @@ -117,18 +117,36 @@
> };
> };
>
> +&pinctrl_nb {
> + i2c1_recovery_pins: i2c1-recovery-pins {
> + groups = "i2c1";
> + function = "gpio";
> + };
> +
> + i2c2_recovery_pins: i2c2-recovery-pins {
> + groups = "i2c2";
> + function = "gpio";
> + };
> +};
> +
> &i2c0 {
> status = "okay";
> - pinctrl-names = "default";
> + pinctrl-names = "default", "recovery";
> pinctrl-0 = <&i2c1_pins>;
> + pinctrl-1 = <&i2c1_recovery_pins>;
> /delete-property/mrvl,i2c-fast-mode;
> + scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> };
>
> &i2c1 {
> status = "okay";
> - pinctrl-names = "default";
> + pinctrl-names = "default", "recovery";
> pinctrl-0 = <&i2c2_pins>;
> + pinctrl-1 = <&i2c2_recovery_pins>;
> /delete-property/mrvl,i2c-fast-mode;
> + scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>
> lm75@48 {
> status = "okay";
> --
> 2.20.1
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
