[PATCH v2 12/28] docs: i2c: smbus-protocol: properly name start and stop conditions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In I2C there is no such thing as a "start bit" or a "stop bit". Use the
proper naming: "start condition" and "stop condition".

Signed-off-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
Reviewed-by: Jean Delvare <jdelvare@xxxxxxx>
---
 Documentation/i2c/smbus-protocol.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index 1600b09ec0be..8510eeda1dd0 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -35,8 +35,8 @@ Key to symbols
 ==============
 
 =============== =============================================================
-S     (1 bit) : Start bit
-P     (1 bit) : Stop bit
+S             : Start condition
+P             : Stop condition
 Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
 A, NA (1 bit) : Accept and reverse accept bit.
 Addr  (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
-- 
2.25.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux