The I2C block on the BCM2711 isn't affected by the clk stretching bug.
So there is no need to apply the corresponding quirk.
Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
Reviewed-by: Eric Anholt <eric@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-bcm2835.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 67752f7..ab5502f 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -12,6 +12,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
@@ -389,7 +390,7 @@ static const struct i2c_algorithm bcm2835_i2c_algo = {
};
/*
- * This HW was reported to have problems with clock stretching:
+ * The BCM2835 was reported to have problems with clock stretching:
* http://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html
* https://www.raspberrypi.org/forums/viewtopic.php?p=146272
*/
@@ -475,7 +476,7 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
adap->algo = &bcm2835_i2c_algo;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
- adap->quirks = &bcm2835_i2c_quirks;
+ adap->quirks = of_device_get_match_data(&pdev->dev);
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0);
@@ -501,7 +502,8 @@ static int bcm2835_i2c_remove(struct platform_device *pdev)
}
static const struct of_device_id bcm2835_i2c_of_match[] = {
- { .compatible = "brcm,bcm2835-i2c" },
+ { .compatible = "brcm,bcm2711-i2c" },
+ { .compatible = "brcm,bcm2835-i2c", .data = &bcm2835_i2c_quirks },
{},
};
MODULE_DEVICE_TABLE(of, bcm2835_i2c_of_match);
--
2.7.4
