Add support for Intel(R) Programmable Services Engine (Intel(R) PSE) I2C
controller in Intel Elkhart Lake when interface is assigned to the host
processor.
Signed-off-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-designware-pcidrv.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 249ee3ee2a09..050adda7c1bd 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -33,6 +33,7 @@ enum dw_pci_ctl_id_t {
baytrail,
cherrytrail,
haswell,
+ elkhartlake,
};
struct dw_scl_sda_cfg {
@@ -168,6 +169,14 @@ static struct dw_pci_controller dw_pci_controllers[] = {
.flags = MODEL_CHERRYTRAIL,
.scl_sda_cfg = &byt_config,
},
+ [elkhartlake] = {
+ .bus_num = -1,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .functionality = I2C_FUNC_10BIT_ADDR,
+ .clk_khz = 100000,
+ },
};
#ifdef CONFIG_PM
@@ -340,6 +349,15 @@ static const struct pci_device_id i2_designware_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x22C5), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C6), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C7), cherrytrail },
+ /* Elkhart Lake (PSE I2C) */
+ { PCI_VDEVICE(INTEL, 0x4bb9), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bba), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bbb), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bbc), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bbd), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bbe), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bbf), elkhartlake },
+ { PCI_VDEVICE(INTEL, 0x4bc0), elkhartlake },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
--
2.23.0.rc1
