ltc2990 will now use device_property_read_u32_array() instead of
of_property_read_u32_array() - allowing the use of software nodes
via fwnode_create_software_node().
This allows code using i2c_new_device() to specify a default
measurement mode for the LTC2990.
Signed-off-by: Max Staudt <max@xxxxxxxxx>
---
drivers/hwmon/ltc2990.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/hwmon/ltc2990.c b/drivers/hwmon/ltc2990.c
index f9431ad43..e06619ac9 100644
--- a/drivers/hwmon/ltc2990.c
+++ b/drivers/hwmon/ltc2990.c
@@ -206,7 +206,6 @@ static int ltc2990_i2c_probe(struct i2c_client *i2c,
int ret;
struct device *hwmon_dev;
struct ltc2990_data *data;
- struct device_node *of_node = i2c->dev.of_node;
if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
@@ -218,9 +217,10 @@ static int ltc2990_i2c_probe(struct i2c_client *i2c,
data->i2c = i2c;
- if (of_node) {
- ret = of_property_read_u32_array(of_node, "lltc,meas-mode",
- data->mode, 2);
+ if (i2c->dev.of_node || i2c->dev.fwnode) {
+ ret = device_property_read_u32_array(&i2c->dev,
+ "lltc,meas-mode",
+ data->mode, 2);
if (ret < 0)
return ret;
--
2.11.0
