> Subject: Re: [EXT] Re: i2c: imx: support slave mode for imx I2C driver > > Caution: EXT Email > > On Fri, Aug 09, 2019 at 04:04:45AM +0000, Biwen Li wrote: > > > > > > Hi, > > > > > > On Thu, Aug 08, 2019 at 11:53:43AM +0800, Biwen Li wrote: > > > > The patch supports slave mode for imx I2C driver > > > > > > > > Signed-off-by: Biwen Li <biwen.li@xxxxxxx> > > > > --- > > > > drivers/i2c/busses/i2c-imx.c | 199 > > > > ++++++++++++++++++++++++++++++++--- > > > > 1 file changed, 185 insertions(+), 14 deletions(-) > > > > > > > > diff --git a/drivers/i2c/busses/i2c-imx.c > > > > b/drivers/i2c/busses/i2c-imx.c index b1b8b938d7f4..f7583a9fa56f > > > > 100644 > > > > --- a/drivers/i2c/busses/i2c-imx.c > > > > +++ b/drivers/i2c/busses/i2c-imx.c > > > > @@ -202,6 +202,9 @@ struct imx_i2c_struct { > > > > struct pinctrl_state *pinctrl_pins_gpio; > > > > > > > > struct imx_i2c_dma *dma; > > > > +#if IS_ENABLED(CONFIG_I2C_SLAVE) > > > > + struct i2c_client *slave; > > > > +#endif /* CONFIG_I2C_SLAVE */ > > > > > > Other drivers just do a "select I2C_SLAVE" in Kconfig to get rid of > > > these #ifs. We should do the same. > > Hi sascha, I don't know your meaning, could you let it clearer? > > Other drivers have "select I2C_SLAVE" in Kconfig, so they do not need any #ifdef > CONFIG_I2C_SLAVE as this is always true. Okay, sascha, got it, I will remove the option in v2, thanks. > > Sascha > > -- > Pengutronix e.K. | > | > Industrial Linux Solutions | > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pe > ngutronix.de%2F&data=02%7C01%7Cbiwen.li%40nxp.com%7C2ad7a8ef > 04c84f224a9808d71eefaf43%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0 > %7C0%7C637011887098895560&sdata=Dde7Hi6eMWcg7SM8T63eBtgY > XsQPu3HFJaZMt6z8Vck%3D&reserved=0 | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 > | > Amtsgericht Hildesheim, HRA 2686 | Fax: > +49-5121-206917-5555 |